2010 Vauxhall Vivaro

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn mounting D bush (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt webbing significantly weakened cut greater than 4mm (7.1.2 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Road wheel slightly distorted both rear (5.2.2 (c) (i))

Seat belt slightly damaged drivers (7.1.2 (b) (i))

slight damage to o/s mirror

Central Brake pipe excessively corroded (1.1.11 (c))

Direction indicator incorrect colour both rear (4.4.3 (a))

Hazard warning lamps inoperative (4.4.1 (e))

Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c))

Position lamp not working both front (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Road wheel slightly distorted both rear (5.2.2 (c) (i))

Seat belt slightly damaged drivers (7.1.2 (b) (i))

slight damage to o/s mirror

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn front trailing arm bush (5.3.4 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nail in nsr tyre tread

rear brake pads approx 80% worn

Offside Front Steering system excessively tight (2.2.D.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

nail in nsr tyre tread

rear brake pads approx 80% worn

Offside Rear fog lamp not working (1.3.2b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)