2001 Peugeot 206

undertrays fitted

Offside Front bulkhead corroded

Front Brake pipe excessively corroded to rear (3.6.B.2c)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Brake pipe excessively corroded compensater to flexible hose (3.6.B.2c)

Offside Front bulkhead corroded

All brake pipes under sealed

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front brake discs pitted

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside rear brake application uneven (3.7.B.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

All brake pipes under sealed

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front brake discs pitted

Brake load sensing valve stiff (3.6.E.3)

Brake load sensing valve stiff (3.6.E.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim too high (1.8)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Front front brake application uneven (3.7.B.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Offside Front Side repeater incorrect colour (1.4.A.2f)

Offside Rear Brake load sensing valve linkage seized (3.6.E.3)

full engine covers fitted

nail in o/s/r tyre

o/s/f mud flap missing

scratch to n/s/r quarter panel

slight dampness around o/s/f and n/s/f shaocabsorbers

small stone chips in windscreen

engine covers fitted

n/s/f washer jet part blocked

nail in n/s/r tyre

small cut in n/s/f tyre outer sidewall

surface coroshon to front brake disks recomend front brake inspection