2003 Fiat Scudo

Front Suspension component mounting prescribed area is corroded but not considered excessive o/s and n/s flitches (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear crossmember holed and corroded but not within a prescribed area

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

exhaust system deteriorated

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive o/s and n/s flitches (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear crossmember holed and corroded but not within a prescribed area

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

exhaust system deteriorated

Brake pipe slightly corroded rear (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive front inner flitches (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive rear cross member (2.4.A.3)

both front tyres wearing on edges

rear exhaust tail pipe missing but not affection its function

Offside Registration plate lamp not working (1.1.C.1d)

Offside Subframe mounting prescribed area is excessively corroded undersill (2.4.A.3)

Subframe mounting prescribed area is excessively corroded both front outer sills (2.4.A.3)

Brake pipe slightly corroded rear (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive front inner flitches (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive rear cross member (2.4.A.3)

both front tyres wearing on edges

rear exhaust tail pipe missing but not affection its function

both front outer sills slightly corroded

both front top mount areas slightly corroded

both inner rack joints have slight play

offside side repeater slightly discoloured

Nearside Front Subframe mounting prescribed area is excessively corroded under sill (2.4.A.3)

both front outer sills slightly corroded

both front top mount areas slightly corroded

both inner rack joints have slight play

offside side repeater slightly discoloured

Nearside Front tyre wearing on edge

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

chip in windscreen zone (b)

n/s/r has nail in tyre

o/s/f inner steering rack joint has slight play

o/s/f tyre worn

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

chip in windscreen zone (b)

n/s/r has nail in tyre

o/s/f inner steering rack joint has slight play

o/s/f tyre worn

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp incorrect colour (1.7.5b)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp not working on dipped beam (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both front brake discs wearing thin.

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Rear registration plate deteriorated (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear number plate some damage but legible and secure

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)