MOT Status
ValidMileage
182,444 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Underside of Vehicle treated
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill areas (6.1.1 (c) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill areas (6.1.1 (c) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
under sealed at time of test
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear floor pans (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened rear arms around front bushes (5.3.3 (b) (i))
headlamp beam images deteriorated
sill covers fitted
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Headlamp light source and lamp not compatible (4.1.4 (c))
Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear floor pans (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened rear arms around front bushes (5.3.3 (b) (i))
sill covers fitted
Brake pipe corroded, covered in grease or other material Rear of O/S front to rear brake pipe (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened trailing arm front mount (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge + going out of shape (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened trailing arm front mount (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge + perished (5.2.3 (e))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Plastic sill covers fitted
Rear bumper cross brace heavily corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Rear Brakes imbalanced across an axle N/S low (1.2.1 (b) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material Rear of O/S front to rear brake pipe (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened trailing arm front mount (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge + going out of shape (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened trailing arm front mount (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge + perished (5.2.3 (e))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Plastic sill covers fitted
Rear bumper cross brace heavily corroded
Corrosion to n/s/r & o/s/r trailing arms, n/s/r & o/s/r top suspension arms, n/s & o/s inner & outer sills
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm front bush (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
O/s/r brake pad moving in holder
Plastic sill covers fitted
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Seat belt not functioning as intended (7.1.2 (c))
Offside Rear Seat belt not functioning as intended (7.1.2 (c))
Offside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS
Corrosion to n/s/r & o/s/r trailing arms, n/s/r & o/s/r top suspension arms, n/s & o/s inner & outer sills
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm front bush (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
O/s/r brake pad moving in holder
Plastic sill covers fitted
Bonding letting go on n/s/f suspension lower arm front bush
Rear suspension arms corroded
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Bonding letting go on n/s/f suspension lower arm front bush
Rear suspension arms corroded
Offside Front Lower Steering linkage ball joint has slight play (2.1.3 (b) (i))
Nearside Headlamp aim projected beam image is obviously incorrect dip beam (4.1.2 (c))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Steering linkage ball joint has slight play (2.1.3 (b) (i))
Corrosion to rear brake discs
Nearside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x 2 (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Corrosion to rear brake discs
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Blow from exhaust rear box
Play in o/s/r anti roll bar link
Nearside Rear Tyre tread depth below requirements of 1.6mm cords showing (4.1.E.1)
Blow from exhaust rear box
Play in o/s/r anti roll bar link
Nearside Front Brakes imbalanced across an axle low (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
N/s/f brake binding
Slight bind on o/s/r brake
Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside rear brake binding (3.7.B.1)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Offside Front Braking system leaking (3.6.A.1) DANGEROUS
Slight bind on o/s/r brake
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust noisy (7.1.4)
Nearside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Exhaust noisy (7.1.4)
Nearside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Outer Rear Brake pad(s) wearing thin (3.5.1g)
Front registration plate displaying a honeycomb or similar effect background (6.3.3)
Rear registration plate displaying a honeycomb or similar effect background (6.3.3)
Offside Outer Rear Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc slightly scored (3.5.1h)
Offside Windscreen wiper blade insecure (8.2.2)
How Reliable is the Honda Civic?
Based on 9,391,580 MOT tests across 693,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DY54 ASX is a 2004 Honda Civic in Silver with a 1,998cc petrol engine. This vehicle has been through 35 MOT tests with a personal pass rate of 57.1%.
Across all 2004 Honda Civic models, the average MOT pass rate is 74.2% with a typical mileage of 74,453 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 307,913 recorded failures. If you're considering buying DY54 ASX, it's worth having these areas checked by a mechanic before committing.
The Honda Civic typically stays on UK roads for around 34 years. At 22 years old, this Honda Civic is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DY54 ASX?
You can check the full history of DY54 ASX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DY54 ASX registered?
DY54 ASX is a 2004 Honda Civic, first registered on 4 September 2004.
Is DY54 ASX safe to buy?
The MOT history for DY54 ASX shows 35 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DY54 ASX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DY54 ASX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.