MOT Status
ValidMileage
66,407 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor area (7.1.1 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust system insecure (6.1.2 (a))
Front Registration plate insecure (0.1 (a))
Offside Rear reflector missing (4.8.2 (a) (ii))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor area (7.1.1 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Exhaust system insecure (6.1.2 (a))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) DANGEROUS
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Sub-frame corroded but not seriously weakened both subframe and all arms and underbody corroded (5.3.3 (b) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Exhaust system insecure mount corroded (6.1.2 (a))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Sub-frame corroded but not seriously weakened both subframe and all arms and underbody corroded (5.3.3 (b) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Inner Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))
Offside Front Tyre has ply or cords exposed 205/55R16 (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
engine oil low
Front Brake pad(s) wearing thin Front all 70% worn (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin rear all 70% worn (3.5.1g)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear position lamp(s) not working (1.1.A.3b)
Front Brake pad(s) wearing thin Front all 70% worn (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin rear all 70% worn (3.5.1g)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)
Front Tyres are wearing on outter edge
Nearside Rear Brake has slight bind
Offside Rear Brake has slight bind
Rear Brakes corroded
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DY58 BVG is a 2008 Mazda 3 in Red with a 1,598cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DY58 BVG, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DY58 BVG?
You can check the full history of DY58 BVG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DY58 BVG registered?
DY58 BVG is a 2008 Mazda 3, first registered on 2 September 2008.
Is DY58 BVG safe to buy?
The MOT history for DY58 BVG shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DY58 BVG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DY58 BVG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.