MOT Status
ValidMileage
120,155 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive beam axle (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive beam axle (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge and cracking (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge and cracking (5.2.3 (e))
engine cover fitted not allowing full inspection of components
under trays fitted not allowing full inspection of components
Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall (4.1.D.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm on edges ( 225/45/18 ) (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim too high (1.8)
Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)
Nearside Rear Nail in tyre ()
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
engine cover fitted not allowing full inspection of components
under trays fitted not allowing full inspection of components
child seat fitted,full inspection not carried out
Front Tyre worn close to the legal limit (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Headlamp levelling device obviously defective (1.7.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim too low (1.8)
Front Tyre worn close to the legal limit (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Engine covers fitted obscuring some components in the engine bay
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
nsr tyre tread on inner perished
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too low (1.8)
nsr tyre tread on inner perished
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DY58 TWJ is a 2008 Mazda 6 in Blue with a 2,488cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2008 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 87,272 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying DY58 TWJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 18 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DY58 TWJ?
You can check the full history of DY58 TWJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DY58 TWJ registered?
DY58 TWJ is a 2008 Mazda 6, first registered on 23 September 2008.
Is DY58 TWJ safe to buy?
The MOT history for DY58 TWJ shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DY58 TWJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DY58 TWJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.