MOT Status
ExpiredMileage
83,216 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp aim too low Both (4.1.2 (a))
Headlamp insecure Both (4.1.1 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Outer sills corroded - not yet considered excessive.
Suspension components corroded but not considered excessive.
fuel lines rusting
Brake pipe slightly corroded (3.6.B.2c)
Seat belt anchorage prescribed area is corroded but not considered excessive Rear floor under seats. (5.2.6)
Shock absorber has a light misting of oil (2.7.3)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Brake pipe slightly corroded (3.6.B.2c)
Seat belt anchorage prescribed area is corroded but not considered excessive Rear floor under seats. (5.2.6)
Shock absorber has a light misting of oil (2.7.3)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside front tyre tread tread wearing on outer edge.
Nearside rear brake binding slightly.
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Passenger's seat cannot be secured in the upright position. (6.2.A.2)
Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a light misting of oil (2.7.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen washer provides insufficient washer liquid (8.2.3)
fuse/wiring junction box insecure on nearside near gearbox.
trim insecure in offside front wheel arch.
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
fuse/wiring junction box insecure on nearside near gearbox.
trim insecure in offside front wheel arch.
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside rear brake binding (3.7.B.1)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a light misting of oil (2.7.3)
o/s/r wheel bearing not tested
Battery insecure
Brake master cylinder slightly corroded (3.6.G.1b)
Brake servo corroded but not excessively weakened (3.6.A.2b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear brake grabbing slightly (3.7.A.5b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside rear brake grabbing slightly (3.7.A.5b)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
How Reliable is the Peugeot 205?
Based on 591,894 MOT tests across 102,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E111 BBH is a 1987 Peugeot 205 in White with a 1,580cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 1987 Peugeot 205 models, the average MOT pass rate is 66.6% with a typical mileage of 100,396 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 205 fails its MOT is brake pipe excessively corroded, accounting for 43,839 recorded failures. If you're considering buying E111 BBH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 205 typically stays on UK roads for around 40 years. At 39 years old, this Peugeot 205 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E111 BBH?
You can check the full history of E111 BBH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E111 BBH registered?
E111 BBH is a 1987 Peugeot 205, first registered on 20 November 1987.
Is E111 BBH safe to buy?
The MOT history for E111 BBH shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E111 BBH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E111 BBH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.