1987 Austin Mini 1000 City E

underside of vehicle undersealed

misting of oil offside rear brake back plate

offside rear foot and handbrake performance low may need attention shortly

underside of vehicle undersealed

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Windscreen wiper not working (3.4 (a))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Registration plate inscription illegible (0.1 (b))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Horn not working (7.7 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Seat belt missing (7.1.2 (a))

Rear fog lamp missing (4.5.1 (a) (ii))

Windscreen washer not working (3.5 (a))

All direction indicators flashing less than 60 times a minute (4.4.4 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Front Registration plate does not conform to the specified requirements excessively damaged, deteriorated (0.1 (d))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Windscreen wiper not working (3.4 (a))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Horn not working (7.7 (a) (ii))

Main beam tell-tale not working (4.9.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))

Offside Front Sub-frame attachment bracket/mounting insecure not located (5.3.3 (a) (i))

Offside Rear Rear fog lamp missing (4.5.1 (a) (ii))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Registration plate does not conform to the specified requirements have background overprinting (0.1 (d))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Lower Steering linkage ball joint has slight play (2.1.3 (b) (i))

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Lower Suspension component mounting prescribed area is excessively corroded cill (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded inner cill (5.2.6)

Offside Front Side repeater not working (1.4.A.2c)

Offside Lower Suspension component mounting prescribed area is excessively corroded cill (2.4.A.3)

Brake pedal anti-slip provision missing (3.3.A.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Passenger's seat insecure (6.2.A.1)

Nearside Front Steering pivot point has excessive play (2.2.B.1g)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering pivot point has excessive play (2.2.B.1g)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever insecure (3.1.3b)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Rear Sub-frame inappropriately repaired (2.4.A.2)

Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Rear Sub-frame repaired, but not inappropriately (2.4.A.2)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Steering column top mounting bracket insecure (2.1.2d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

general corrosion on vehicle

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

general corrosion on vehicle

speedo not working

Nearside Rear rear brake juddering severely (3.7.A.5b)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Rear Braking system leaking (3.6.A.1)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

An item not tested (Manual)

Front Front position lamp(s) not working (1.1.A.3b)

Front Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate letter/figure missing (6.3.1c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Windscreen wiper blade deteriorated (8.2.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Front position lamp(s) not working (1.1.A.3b)

Rear Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance (1.3.2d)

Rear fog lamp switch missing (1.3.1a)

no main beam light. †corrosion around headlights. †offside front inner sill corroded. †offside front inner arch corroded. †slight blow on downpipe. †nearside front track rod end rubber split. † †

All position lamps not working (1.1.A.3b)

Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Windscreen wiper blade deteriorated (8.2.2)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Rear Rear fog lamp missing (1.3.2a)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp switch missing (1.3.1a)

Rear fog lamp tell tale not working (1.3.1b)

Registration plate lamp not working (1.1.C.1d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

hole in n/s/f inner arch

hole in o/s inner sill

no tell tale for main beam

oil leak from rocker cover gasket