1988 Fiat Panda

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated Pin hole cause by boot rubbing on bottom ball joint (6.1.7 (g) (i))

Nearside Front Outer Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt Retaining clip missing (2.1.3 (g) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sub frame mounting location (6.1.1 (c) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated Pin hole cause by boot rubbing on bottom ball joint (6.1.7 (g) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near subframe mount (6.2.2 (d) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near shock mounting (6.2.2 (d) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Coolant leak Expansion bottle empty. signs of leak on back of engine ()

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material In wheel arch (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Coolant leak Expansion bottle empty. signs of leak on back of engine ()

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material In wheel arch (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Center section of sill (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Horn not working (7.7 (a) (ii))

Windscreen washer not working (3.5 (a))

Exhaust has a minor leak of exhaust gases at join between flexi pipe and mid section (6.1.2 (a))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Exhaust has a minor leak of exhaust gases at join between flexi pipe and mid section (6.1.2 (a))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Centre exhaust rubber mount split.

Clutch pedal rubber missing.

Small hole in NSF outer cv gaiter.

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL AND FLOOR. (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Steering locking device ineffective Track rod end lock nut . (2.1.3 (d))

Centre exhaust rubber mount split.

Clutch pedal rubber missing.

Small hole in NSF outer cv gaiter.

Headlamp deteriorated but light output not reduced nearside and offside (1.7.5a)

Parking brake performance only just met

Suspension spring mounting prescribed area is excessively corroded nearside rear floor pan to inner sill (2.4.A.3)

Headlamp deteriorated but light output not reduced nearside and offside (1.7.5a)

Parking brake performance only just met

Nearside Front Brake hose inappropriately repaired insecure (3.6.A.3)

Nearside Rear Lower Shock absorber insecure (2.7.2b)

Offside Front Brake hose inappropriately repaired insecure (3.6.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Offside Rear Lower Shock absorber insecure (2.7.2b)

Rear fog lamp tell tale not working (1.3.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nail in offside rear tyre

Nearside Front Drag link end ball joint has slight play (2.2.B.1f)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Steam from interior vents. Possible leak in heater matrix.

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Steam from interior vents. Possible leak in heater matrix.