MOT Status
ExpiredMileage
125,382 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/sr suspension bump stop and surrounding area are rust corroded
o/sr suspension bump stop missing and surrounding area is rust corroded
o/sr tyre worn smooth on inner treads
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Front Valve stem seriously misaligned (4.1.D.1e)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/sr suspension bump stop and surrounding area are rust corroded
o/sr suspension bump stop missing and surrounding area is rust corroded
o/sr tyre worn smooth on inner treads
Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Centre Front registration plate deteriorated but not likely to be misread (6.3.1d)
Exhaust noisy (7.1.4)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)
fuel tank filler pipes corrosion
nearside front chassis corrosion evident
offside and nearside rear chassis around suspension bump stops corrosion evident
offside front and rear inner sill members corrosion evident
Front Exhaust has a major leak of exhaust gases (7.1.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Centre Front registration plate deteriorated but not likely to be misread (6.3.1d)
Exhaust noisy (7.1.4)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)
fuel tank filler pipes corrosion
nearside front chassis corrosion evident
offside and nearside rear chassis around suspension bump stops corrosion evident
offside front and rear inner sill members corrosion evident
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front number plate starting to deteriorate
n/sr boot floor / flitch panal holed and corroded
old welding repairs to n/sf chassis runner, o/sr outer sill, o/sr boot floor
Nearside Front Steering locking device insecure (2.2.C.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear wheel bearing has excessive play (2.6.2)
Offside Rear wheel bearing rough when rotated (2.6.1)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/sr boor flitch panal holed
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
welding repair to o/sr chassis runner was done from inside the vehicle
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Direction indicator insecure (1.4.A.2b)
Nearside Headlamp aim too high (1.8)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Direction indicator insecure (1.4.A.2b)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Rear fog lamp switch faulty (1.3.1a)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Rear wheel bearing has slight play (2.6.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
welding repair to o/sr chassis runner was done from inside the vehicle
Both rear chassis runners and bump stops rust corroded
Both rear tyres worn on inner edges
Front number plate starting to deteriorate
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
welding repairs heavily undersealed
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Both rear chassis runners and bump stops rust corroded
Both rear tyres worn on inner edges
Front number plate starting to deteriorate
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
slight corrosion to exhaust system
slight play in both rear wheel bearings
Offside Brake pipe excessively corroded (3.6.B.2c)
How Reliable is the Nissan Prairie?
Based on 19,073 MOT tests across 3,916 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E200 BGH is a 1988 Nissan Prairie in Beige with a 1,809cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 1988 Nissan Prairie models, the average MOT pass rate is 63.3% with a typical mileage of 102,707 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Prairie fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 3,717 recorded failures. If you're considering buying E200 BGH, it's worth having these areas checked by a mechanic before committing.
The Nissan Prairie typically stays on UK roads for around 41 years. At 38 years old, this Nissan Prairie is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E200 BGH?
You can check the full history of E200 BGH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E200 BGH registered?
E200 BGH is a 1988 Nissan Prairie, first registered on 25 May 1988.
Is E200 BGH safe to buy?
The MOT history for E200 BGH shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E200 BGH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E200 BGH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.