1988 Ford Transit

front cross member rusty

Central Prop shaft bearing has slight play (6.1.7 (b) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Central Prop shaft bearing has slight play (6.1.7 (b) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

front cross member rusty

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Central Prop shaft bearing has slight play (6.1.7 (b) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

front cross member rusty

All position lamps adversely affected by the operation of another lamp (4.2.3 (c))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside outer sill rusty

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside outer sill rusty

Oil leak, but not excessive (8.4.1 (a) (i))

Prop shaft bearing has slight play (6.1.7 (b) (i))

front cross member rusty

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 26% (1.2.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 29% (1.2.1 (b) (i))

corrosion developing in front cross member

corrosion developing to offside and nearside front wheel arches

corrosion developing to offside and nearside outer sills

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 26% (1.2.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 29% (1.2.1 (b) (i))

corrosion developing in front cross member

corrosion developing to offside and nearside front wheel arches

corrosion developing to offside and nearside outer sills

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing / cross member (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill as marked (5.3.6 (a) (i))

Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

O/S/R lamp damaged

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Wide spread corrosion to inner and outer sills /front and rear cross members and front inner arches

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Steering column top bearing slightly worn (2.2.2 (b))

under side rusty

Steering column top bearing slightly worn (2.2.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired cross member (5.3.6 (a) (i))

Steering column top bearing slightly worn (2.2.2 (b))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired cross member (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Steering column top bearing slightly worn (2.2.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside rear tyre heavily perished

Brake hose has slight corrosion to ferrules Both front (3.6.B.4e)

Different size tyres front to rear

Engine runs erratic on ideal

O/s/r light lens repaired with lens repair tape

Various under body corrosion

Battery insecure (1.9.1)

Central Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Seat belt stitching incomplete Not connected to buckle (5.2.2b)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Rear position lamp(s) incorrect colour No lens (1.1.A.3e)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Battery weak

Auxiliary belt loose

Brake hose has slight corrosion to ferrules Both front (3.6.B.4e)

Different size tyres front to rear

Engine runs erratic on ideal

Various under body corrosion

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

nearside front door sill corroded just outside of prescribed areas

Battery insecure both (1.9.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded door sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

nearside front door sill corroded just outside of prescribed areas

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front front brake binding (3.7.B.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Battery insecure (1.9.1)

Fuel cap/sealing device missing (7.2.4a)

Nearside Front front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

n/s rear tyre splitting on outer sidewall but not to cord

Battery insecure (1.9.1)

Nearside Front Electrical wiring deteriorated and bare wires exposed (1.9.2c)

Nearside Front Electrical wiring insecure (1.9.2a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

n/s rear tyre splitting on outer sidewall but not to cord

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust system not adequately supported (7.1.1)

o/s outer hand brake cable split

Nearside Steering rack gaiter split (2.2.D.2d)

o/s outer hand brake cable split

Hazard warning switch faulty (1.4.B.1d)

Nearside Headlamp aim too high (1.8)

Engine slight smoke on idle

Underside of vehicle heavy underseal

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

battery insecure

Underside of vehicle heavy underseal