1987 Honda Prelude

Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed (6.2.2 (d) (i))

Nearside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed (6.2.2 (d) (i))

Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed (6.2.2 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

all suspension bushers splitting

surface rust under body

suspension parts heavily correded

under body heavily under sealed

Front Windscreen washer not working (3.5 (a))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill (6.2.2 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

all suspension bushers splitting

surface rust under body

suspension parts heavily correded

under body heavily under sealed

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

front suspension bushers pershed and cracking

rear suspension bushers cracking and pershed

under body correded

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front of arch and rear of inner arched correded and holed (6.1.1 (c) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch holed (6.1.1 (c) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

front suspension bushers pershed and cracking

rear suspension bushers cracking and pershed

under body correded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Hazard warning switch inoperative will not turn off (4.4.2 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement All Bushes (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement All Bushes (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor (2.4.A.3)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Front Radius arm has excessive play in a ball joint (2.4.G.2)

Offside Side repeater not working (1.4.A.2c)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear fog lamp switch faulty (1.3.1a)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)