MOT Status
ExpiredMileage
99,470 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Nail in tyre ()
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view stonechip (3.2 (a) (i))
All four tyres are at least 15 years old 155/80/13
Corrosion throughout underside of vehicle
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear of inner wheel arch (6.1.1 (c) (i))
Nearside front wing damaged
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear of inner wheel arch (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing tread stepped on inner edge (5.2.3 (d) (ii))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Various areas of underseal used to underside of vehicle due to previous weld repairs
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above spring (6.1.1 (c) (i))
All four tyres are at least 15 years old 155/80/13
Corrosion throughout underside of vehicle
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear of inner wheel arch (6.1.1 (c) (i))
Nearside front wing damaged
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear of inner wheel arch (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing tread stepped on inner edge (5.2.3 (d) (ii))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Various areas of underseal used to underside of vehicle due to previous weld repairs
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
screen has very light scratches and chips
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
general under body corrosion
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
general under body corrosion
Emissions not tested Choke on (8.2.1.2 (d))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor (6.2.2 (d) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coolant leak ()
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp does not operate immediately when selected on dipped beam (1.7.4a)
Coolant leak
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Fuel system component leaking (7.2.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)
Offside Headlamp does not operate immediately when selected on main beam (1.7.4a)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Steering arm has relative movement at its fixings (2.2.B.1h)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS
Rear Shock absorber has a light misting of oil (2.7.3)
Steering system has slight free play detected at steering wheel (2.2.A.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Inner Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
How Reliable is the Ford Orion?
Based on 85,037 MOT tests across 23,306 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E313 SYB is a 1987 Ford Orion in Grey with a 1,392cc petrol engine. This vehicle has been through 35 MOT tests with a personal pass rate of 57.1%.
Across all 1987 Ford Orion models, the average MOT pass rate is 68.3% with a typical mileage of 53,548 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Orion fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 15,192 recorded failures. If you're considering buying E313 SYB, it's worth having these areas checked by a mechanic before committing.
The Ford Orion typically stays on UK roads for around 41 years. At 39 years old, this Ford Orion is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E313 SYB?
You can check the full history of E313 SYB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E313 SYB registered?
E313 SYB is a 1987 Ford Orion, first registered on 31 December 1987.
Is E313 SYB safe to buy?
The MOT history for E313 SYB shows 35 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E313 SYB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E313 SYB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.