MOT Status
ExpiredMileage
68,336 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Wheel bearing has excessive play both (5.1.3 (a) (i))
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Bonnet seriously at risk of opening inadvertently (3.1 (b) (ii)) DANGEROUS
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))
Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Side repeater not working (4.4.1 (a) (ii))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Windscreen washer not working (3.5 (a))
Nearside Front inner wing corroded
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
bonnet second latch not working
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Service brake lagging in operation (1.2.1 (d))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength tie rod arm bracket (5.3.6 (a) (i))
Rear Exhaust system insecure (6.1.2 (a))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front tie rod mounting bracket rusty
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
reverse lamp inop
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Service brake lagging in operation 77 % (1.2.1 (d))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Vehicle Identification Number not displayed loose in door pocket (0.2 (a))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front tie rod mounting bracket rusty
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
reverse lamp inop
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Front pannel corroded
Nearside Rear Position lamp insecure (4.2.1 (c) (i))
Nearside Rear Stop lamp(s) insecure (4.3.1 (c) (i))
Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Exhaust mounting defective all rubber mounts (6.1.2 (a))
Front Brake hose slightly deteriorated Both NS & OS X 2 (1.1.12 (b) (ii))
Front Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced panel heavily corroded and holed in places (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced scuttle panel heavily corroded (6.1.1 (c) (i))
Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Both NS & OS tie bar mounts (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both NS & OS tie bar bushes (5.3.4 (a) (i))
Front Wheel bearing has slight play Both NS & OS (5.1.3 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower A pillar at windscreen heavily corroded (6.1.1 (c) (i))
Rear Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both NS & OS front of spring mounts (5.3.6 (a) (i))
Suspension component corroded but not seriously weakened rear leaf springs and axle (5.3.3 (b) (i))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Exhaust mounting defective all rubber mounts (6.1.2 (a))
Front Brake hose slightly deteriorated Both NS & OS X 2 (1.1.12 (b) (ii))
Front Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced panel heavily corroded and holed in places (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced scuttle panel heavily corroded (6.1.1 (c) (i))
Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Both NS & OS tie bar mounts (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both NS & OS tie bar bushes (5.3.4 (a) (i))
Front Wheel bearing has slight play Both NS & OS (5.1.3 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower A pillar at windscreen heavily corroded (6.1.1 (c) (i))
Rear Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both NS & OS front of spring mounts (5.3.6 (a) (i))
Suspension component corroded but not seriously weakened rear leaf springs and axle (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced panel heavily corroded and holed in places (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced scuttle panel heavily corroded (6.1.1 (c) (i))
Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Both NS & OS tie bar mounts (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both NS & OS tie bar bushes (5.3.4 (a) (i))
Front Suspension spring mounting prescribed area is corroded but not considered excessive Both NS & OS leaf spring mounts (5.3.6 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake hose slightly deteriorated both (1.1.12 (b) (ii))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower a pillar at windscreen heavily corroded (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Rear Suspension component corroded but not seriously weakened axle and leaf springs (5.3.3 (b) (i))
Exhaust system insecure 4 x exhaust rubbers (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed within 30cm of suspension (5.3.6 (a) (i))
Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Rear Brake load sensing valve linkage defective and function impaired on axle (1.1.17 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced panel heavily corroded and holed in places (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced scuttle panel heavily corroded (6.1.1 (c) (i))
Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Both NS & OS tie bar mounts (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both NS & OS tie bar bushes (5.3.4 (a) (i))
Front Suspension spring mounting prescribed area is corroded but not considered excessive Both NS & OS leaf spring mounts (5.3.6 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake hose slightly deteriorated both (1.1.12 (b) (ii))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower a pillar at windscreen heavily corroded (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Coil spring corroded Both NS & OS (5.3.1 (b) (i))
Rear Suspension component corroded but not seriously weakened axle and leaf springs (5.3.3 (b) (i))
Bonnet retaining device slightly deteriorated (8.4.2)
Front Brake hose slightly deteriorated all (3.6.B.4d)
Front wheel bearing has slight play (2.5.A.3c)
exhaust mounts perished
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill (5.2.6)
Nearside Side repeater not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Bonnet retaining device slightly deteriorated (8.4.2)
Front Brake hose slightly deteriorated all (3.6.B.4d)
Front wheel bearing has slight play (2.5.A.3c)
exhaust mounts perished
Front Brake hose has slight corrosion to ferrules all (3.6.B.4e)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
unable to see front brake pads clearly
Battery insecure (1.9.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Registration plate lamp not working (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake hose has slight corrosion to ferrules all (3.6.B.4e)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
unable to see front brake pads clearly
underside and running gear coatad in surface corrosion
both outer whhel artches and doors has corrotion but no sharp edges at time of test
Front registration plate insecure (6.3.1b)
Offside Obligatory mirror missing (8.1.1)
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
both outer whhel artches and doors has corrotion but no sharp edges at time of test
battory insecure
exhaust rubbers perished
Nearside Front Headlamp aim too low (1.8)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Headlamp insecure (1.7.3)
Offside rear brake application uneven (3.7.B.2)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear brakes release unevenly (3.7.B.4)
battory insecure
exhaust rubbers perished
Brake hose slightly deteriorated (3.6.B.4d)
Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Front wheel bearing has slight play (2.5.A.3c)
Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear Direction indicator affected by the operation of another lamp (1.4.A.2h)
Rear coil spring corroded (2.4.C.1b)
Brake hose slightly deteriorated (3.6.B.4d)
Centre Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Rear Rear fog lamp not working (1.3.2b)
Rear Registration plate lamp not working (1.1.C.1d)
Rear registration plate deteriorated (6.3.1d)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Headlamp aim beam image too far to the left (1.6.B4)
Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Offside Headlamp insecure (1.7.3)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Nearside Rear wheel bearing (2.6.1)
Offside Rear wheel bearing (2.6.1)
How Reliable is the Fiat Ducato?
Based on 1,962,737 MOT tests across 142,446 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E332 MVN is a 1988 Fiat Ducato in White with a 1,971cc petrol engine. This vehicle has been through 34 MOT tests with a personal pass rate of 50%.
Across all 1988 Fiat Ducato models, the average MOT pass rate is 64.1% with a typical mileage of 76,626 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Ducato fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 34,174 recorded failures. If you're considering buying E332 MVN, it's worth having these areas checked by a mechanic before committing.
The Fiat Ducato typically stays on UK roads for around 38 years. At 38 years old, this Fiat Ducato is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E332 MVN?
You can check the full history of E332 MVN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E332 MVN registered?
E332 MVN is a 1988 Fiat Ducato, first registered on 22 April 1988.
Is E332 MVN safe to buy?
The MOT history for E332 MVN shows 34 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E332 MVN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E332 MVN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.