1988 Honda CD250U

Exhaust noisy (8.1.1 (a))

Registration plate does not conform to the specified requirements To small (0.1 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high and too far to the right (4.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high (1.6)

Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride Chain horse shoe securing clip missing! (6.2.1h)

Exhaust is leaking but is not excessively noisey at joint (7.1.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

gear change lever worn

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear suspension has slight stiffness in the movement of the suspension.

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Rear suspension has slight stiffness in the movement of the suspension.

Headlamp aim beam image kick up to the offside (1.6)

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b) DANGEROUS

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Nearside Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Rear Drive chain sprocket slightly worn (6.2.1e)