1988 Honda CG125

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Horn not working (1.7.3a)

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

Chain guard missing

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Chain guard missing

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Braking system does not have an approriate system/s fitted according to its age (3.1.1)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp switch insecure (1.2.4)

Horn not working (1.7.3a)

Nearside Rear Direction indicator missing (1.5.1a)

Offside Rear Direction indicator missing (1.5.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Chain guard missing

Wheel alignment slightly misaligned. (2.5.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Registration plate delaminated (6.3.1.d)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Front Tyre worn close to the legal limit (4.1.3(ii))