1987 Kawasaki KMX125

Brake hose excessively chafed (3.2.B3a)

Brake lever cannot be applied smoothly (3.1.3d)

Direction indicator affected by the operation of another lamp (1.5.1c)

Front Brake component defective due to a deliberate modification which significantly reduces the original strength (3.1.5)

Front Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.3)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has an excessively eccentric bead rim. (4.2.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Fuel system component insecure (7.2.1b)

Fuel tank leaking (7.2.1a)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Registration plate insecure (6.3.1b)

Rear Wheel spoke missing (4.2.1b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear suspension bush has excessive free play (2.4.A2a(i))

Stop lamp affected by the operation of another lamp (1.3.2)

Clutch lever clamp of wrong type and insecure.

Front Brake disc(s) slightly worn (3.2.A1l)

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain slightly loose (6.2.1d)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))