1992 BMW 3 Series

Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Play in steering rack inner joint(s)

light general underside age related surface corrosion

tyres perishing

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front position lamp(s) not working (1.1.A.3b)

Horn not working (1.6.2a)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear fog lamp switch faulty (1.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

registration plate fitted to the front does not have black characters on a white background (6.3.2a)

Slight corrosion on front to rear brake pipe

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Headlamp aim too low (1.8)

Rear fog lamp not working (1.3.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight play in offside front(inner) rack end

Front O/S washer jet could be better.

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Shock absorber has a slightly worn bush (2.7.4)

Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Outer Front Headlamp insecure (1.7.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

**** nearside front tyre inner sidewall cut.****

**** signs of fuel leak from petrol tank ****

****offside rear tyre inner sidewall cut****

both front fog lamps cracked.

both front wishbone rear bushes perishing.

both rear shockabsorber top mountings splitting.

both rear tyres worn on inner edges.

drivers seatbelt fraying.

front to rear fuel lines corroded.

front to rear metal brake pipe corroded.

nearside front brake disc pitted on edges.

nearside front tyre worn on inner edges.

nearside rear brake disc pitted.

offside front fog light not working.

rear brake discs becoming pitted.