MOT Status
ExpiredMileage
90,150 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Steering system excessively rough (2.1.1 (a))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security centre cill (6.2.2 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security centre cill (6.2.2 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Direction indicator not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Central Exhaust system not adequately supported (7.1.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)
Rear wheel bearing has slight play both (2.6.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
fuel tank corroded and shows signs of possible leak
gear linkage worn / touching exhaust
oil leak/s
Centre Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting chassis (6.6.6)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Obligatory mirror insecure (8.1.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Towbar component excessively damaged mounting bracket (6.6.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)
Rear wheel bearing has slight play both (2.6.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
fuel tank corroded and shows signs of possible leak
gear linkage worn / touching exhaust
oil leak/s
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brake pedal has insufficient reserve movement (3.3.A.5)
Brakes imbalanced across an axle (3.7.D.2c)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Lower engine mounting bracket insecure and likely to fail (6.1.D.1b)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Exhaust system not adequately supported (7.1.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brakes imbalanced across an axle (3.7.D.2c)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Service brake indicates brake bind (3.7.D.2a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside rear brake recording little or no effort (3.7.B.5a)
Stop lamp remains on when the brakes are released (1.2.1e)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Centre Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Rear Registration plate lamp not working (1.1.5c)
Nearside outer track rod end joint cover split/missing
Offside outer track rod end joint cover split/missing
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Nearside outer track rod end joint cover split/missing
Offside outer track rod end joint cover split/missing
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E435 NEG is a 1988 Fiat Panda in Red with a 999cc petrol engine. This vehicle has been through 33 MOT tests with a personal pass rate of 51.5%.
Across all 1988 Fiat Panda models, the average MOT pass rate is 62.8% with a typical mileage of 64,709 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying E435 NEG, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 38 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E435 NEG?
You can check the full history of E435 NEG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E435 NEG registered?
E435 NEG is a 1988 Fiat Panda, first registered on 19 February 1988.
Is E435 NEG safe to buy?
The MOT history for E435 NEG shows 33 tests with a 51.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E435 NEG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E435 NEG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.