1988 Bedford Rascal

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Brake disc significantly and obviously worn Both front (1.1.14 (a) (i))

Emissions not tested Due to exhaust fault (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate missing (0.1 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Close to shocker mount (5.3.6 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Position lamp not working All lamps (4.2.1 (a) (ii))

Rear Registration plate missing (0.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Close to gearbox support mount bolts offside (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Body component likely to become detached Moulding strip (6.2.1 (a) (ii)) DANGEROUS

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Offside Rear Body component likely to become detached Metal mudguard (6.2.1 (a) (ii)) DANGEROUS

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Both front shock absorbers have slight movement

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

o/s/f outrigger corroded,slight leak from exhaust front pipe,brake pipes corroding

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

o/s/f outrigger corroded,slight leak from exhaust front pipe,brake pipes corroding

suspension components+brake pipes+ferrules+exhaust corroding,o/s door mirror glass poor condition

rear brakes getting low on effort

suspension components+brake pipes+ferrules+exhaust corroding

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

front brake fluctuating, but not excessively (3.7.B.3)

slight brake binding from all brakes

suspension components+floor+body panels+arches+chassis members+corroded underside,front number plate cracked,brake pipes+ferrules corroding,

Horn not working (1.6.2a)

Nearside Obligatory mirror missing (8.1.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp not working (1.3.2b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

front brake fluctuating, but not excessively (3.7.B.3)

slight brake binding from all brakes

suspension components+floor+body panels+arches+chassis members+corroded underside,front number plate cracked,brake pipes+ferrules corroding,

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Macpherson strut has slight play in the sliding bush or gland (2.5.B.1b)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)

OFFSIDE AND NEARSIDE VALANCE AREAS CORRODED BUT NOT IN PRESCIBED AREA