1987 Bentley Turbo

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Inner Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)

Nearside Outer Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear Brake valve leaking (3.6.A.1)

Nearside Front brake caliper leaking (3.6.A.1) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

suspension components corroded

underside of vehicle corroded

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt (2.4.G.4e)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front coil spring corroded (2.4.C.1b)

Offside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front tyres wearing on inner edges

rear suspension components slightly corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

Suspension joint offside lower dust cover split/missing

front suspension unit slightlt corroded

front tyres worn on inner edge

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Headlamp not working on main beam (1.7.5a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Front Power steering component(s) has slight seepage from a component (2.3.3b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Suspension joint offside lower dust cover split/missing