1988 Bedford Bambi

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

extensive welding repairs to front of vehicle

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

extensive welding repairs to front of vehicle

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

most parts on the underside are lightly corroded

Front registration plate deteriorated (6.3.1d)

Nearside Side repeater not working (1.4.A.2c)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

most parts on the underside are lightly corroded

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive strut mount (2.4.A.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear registration plate faded but not likely to be misread (6.3.1d)

Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside front trailing arm mounts (2.4.A.3)

nearside bump stop missing

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive strut mount (2.4.A.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear registration plate faded but not likely to be misread (6.3.1d)

Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside front trailing arm mounts (2.4.A.3)

nearside bump stop missing

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)