1988 Austin Mini Jet Black

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front position lamp(s) not working (1.1.A.3b)

Horn not working (1.6.2a)

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Side repeater not working (1.4.A.2c)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear Rear position lamp(s) not working (1.1.A.3b)

Rear Stop lamp not working (1.2.1b)

Direction indicators not working (1.4.A.2c)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear wheel bearing has excessive play (2.6.2)

Rear fog lamp not working (1.3.2b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Front passenger door hinge insecure (6.2.B.2)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Front Lower Body has slight corrosion (6.1.B.2)

Nearside Inner Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Parking brake: efficiency below requirements (3.7.B.7)

Front suspension has slight play in an outer ball joint (2.5.B.2a)

Front Brake pipe inadequately clipped (3.6.B.1)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Rear Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Offside Headlamp aim too high (1.8)

Offside Rear fog lamp not working (1.3.2b)

Offside Side repeater not working (1.4.A.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Front suspension has slight play in an outer ball joint (2.5.B.2a)