1988 Austin Mini Mayfair Auto

Front Registration plate inscription illegible (0.1 (b))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Registration plate insecure (0.1 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Brake prescribed area is excessively corroded floor (1.1.21 (e) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear damage to arch trim

Offside Front inner arch corroded

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt comes from rubber suspension damper into the top arm (5.3.4 (b) (ii))

Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt comes from the rubber suspension damper into the top arm (5.3.4 (b) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material underside (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front inner wing

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

weld fractured on hand brake lever mounting but secure at time of test

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorsill (6.1.B.2)

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

passenger door step corroded

Battery insecure (1.9.1)

Front registration plate letter/figure incomplete (6.3.1c)

Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Side repeater missing (1.4.A.2b)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Side repeater missing (1.4.A.2b)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

passenger door step corroded

rear subframe rusty

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Direction indicators not working (1.4.A.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Headlamp not working on dipped beam (1.7.5a)

underbody rusty rear end

underbody rusty rear end