MOT Status
ExpiredMileage
206,045 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (All ) (1.1.11 (c))
Entire vehicle extremely corroded and made up of patches poorly welded. Door posts , chassis, sills and bulkhead seriously corroded and in my opinion (NOT SAFE)
Gearbox cross member very rusty. Could brake off!
Brake master cylinder/servo mounting prescribed area is excessively corroded Near servo and under inner wing (1.1.21 (e) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill and rear wheel arch area (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill and rear wheel arch area (7.1.1 (a) (i))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Steering system excessively rough (2.1.1 (a))
Brake pipe corroded, covered in grease or other material (All ) (1.1.11 (c))
Entire vehicle extremely corroded and made up of patches poorly welded. Door posts , chassis, sills and bulkhead seriously corroded and in my opinion (NOT SAFE)
Gearbox cross member very rusty. Could brake off!
Offside Rear bump stop missing
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet bulk head areas holed (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp not working when sidelamps on (4.3.3 (b))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre under floor area holed (7.1.1 (a) (i))
Offside Front Fuel hose insecure under bonnet fuel pipe / filter insecure to fixings (6.1.3 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet bulk head areas holed (5.3.6 (a) (i))
Offside Rear Body component corroded and likely to cause injury wheel arch sharp edges (6.2.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill areas holed (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under floor corner box sections holed (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing forward lower sections holed (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing upper box sections holed (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre under floor areas hoed (7.1.1 (a) (i))
Power steering malfunctioning steering rough /not returning from after going on locks (2.1.5 (a))
Speedometer cannot be illuminated dash lamps not working at all /speedo not illuminated (7.8 (c) (ii))
Brake hydraulic reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS
Nearside Rear under floor sections corroded
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear rebound block missing
front bumper sections behind bumpers corroded / holed
rear shock absorber covers corroded
Nearside Rear wheel arch /lower sill areas corroded
Offside Rear rebound block missing
Offside Rear wheel arch corroded
front bumper mounting sections corroded / holed
outer sills corroded
rear under floor corner areas corroded
under bonnet bulk head areas corroded
Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember offside upper +lower sections holed (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underwing upper rear section holed (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp not working when other lamps on (4.3.3 (b))
Nearside Rear Suspension arm pin or bush excessively worn upper suspension arm both bushes excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper floor areas holed (5.3.6 (a) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Rear Suspension arm pin or bush excessively worn upper suspension arm both bushes excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underwing upper areas holed near shock absorber upper mounting (5.3.6 (a) (i))
Seat belt anchorage prescribed area strength or continuity significantly reduced centre nearside outer floor pan holed (7.1.1 (a) (i))
Brake master cylinder below minimum mark (1.1.10 (d) (i))
Nearside Rear arch /lower sill areas corroded
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear rebound block missing
Offside Rear wheel arch corroded
front bumper mounting sections corroded / holed
rear underfloor corner areas corroded
under bonnet bulk head areas corroded
Offside Rear rebound block missing
Play in steering rack inner joint(s) ()
Suspension arm pin or bush worn but not resulting in excessive movement both rear upper arms bushes deteriorated (5.3.4 (a) (i))
front brake discs back plate covers rusted
under radiator crossmember box section corroded / holed
underfloor areas/bulk head areas corroded
Nearside Front Lower Suspension arm corroded and seriously weakened arm holed (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis holed (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underfloor section near shock absorber upper mounting (5.3.6 (a) (i))
Offside Front Driver's door pillar insecure lower main pillar excessively holed / flexing (6.2.3 (c) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan areas holed (5.3.6 (a) (i))
Offside Rear rebound block missing
Play in steering rack inner joint(s) ()
Suspension arm pin or bush worn but not resulting in excessive movement both rear upper arms bushes deteriorated (5.3.4 (a) (i))
front brake discs back plate covers rusted
under radiator crossmember box section corroded / holed
underfloor areas/bulk head areas corroded
Play in steering rack inner joint(s) ()
front brake discs back plates deteriorated
front nearside chassis corroded
front nearside lower suspension arm corroded
front offside door pillar deteriorated ( hinges still secure)
front offside floor pan corroded
rear offside rebound block missing
under radiator cross member corroded / holed
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension component mounting prescribed area is excessively corroded underwing areas (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded bulkhead areas (3.6.C.3)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension component mounting prescribed area is excessively corroded floorpan holed (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded underwing areas (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded underfloor areas (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill areas holed (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded underfloor areas holed (5.2.6)
Play in steering rack inner joint(s) ()
front brake discs back plates deteriorated
front nearside chassis corroded
front nearside lower suspension arm corroded
front offside door pillar deteriorated ( hinges still secure)
front offside sill corroded
rear offside rebound block missing
under radiator cross member corroded / holed
Play in steering rack inner joint(s) ()
brake discs back plates covers deteriorated
front bulk head areas corroded
front centre box section under radiator corroded /holed
front nearside chassis corroded
front nearside lower suspension arm corroded
front offside + rear offside outer sills corroded
front offside upper door pillar corroded / smallhole
rear offside rebound block missing
bulkhead areas corroded
front brake discs backplates corroded
front forward crossmember box section corroded
front offside floorpan corroded
front offside tyre inner edge worn
rear nearside underfloor area corroded
rear offside rebound block missing
steering rack arms inner joints slight play
Nearside Front Suspension component mounting prescribed area is excessively corroded underbonnet flitch panel to bulkhead area holed (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded main chassis box section near tie bar mounting (2.4.A.3)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded underwing upper section near shock absorber mounting (2.4.A.3)
bulkhead areas corroded
front brake discs backplates corroded
front forward crossmember box section corroded
front offside floorpan corroded
front offside lower door pillar box section corroded/holed (hinge still secure)
front offside tyre inner edge worn
rear nearside underfloor area corroded
rear offside rebound block missing
steering rack arms inner joints slight play
front brake back plates corroded
front door pillar lower section corroded/holed
front nearside lower suspension arm corroded
front offside chassis section corroded
rear exhaust slightly deteriorated
rear offside + nearside underwing+underfloor sections corroded
rear offside rebound block missing
steering rack arms inner joints slight play/knocking
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
front brake back plates corroded
front door pillar lower swection corroded/holed
front offside chassis section corroded
front suspension arms corroded
rear exhaust slightly deteriorated
rear offside + nearside underwing+underfloor sections corroded
rear offside rebound block missing
steering rack arms inner joints slight play/knocking
Play in steering rack inner joint(s)
front brake back plates corroded
front nearside bulk head corroded
front offside door pillar section corroded
front suspension arms corroded
rear floor pans corroded
rear offside rebound block missing
rear offside+nearside underwing areas corroded
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Play in steering rack inner joint(s)
front brake back plates corroded
front nearside bulk head corroded
front offside door pillar section corroded
front suspension arms corroded
rear floor pans corroded
rear offside brake low efficiency
rear offside rebound block missing
rear offside+nearside underwing areas corroded
Play in steering rack inner joint(s)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake lever has no reserve travel (3.1.6b)
Play in steering rack inner joint(s)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Parking brake lever has little reserve travel (3.1.6b)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
some play in steering rack
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
both steering rack inner joints worn
n/s/r sill corroded
o/s/r n/s/r inner chassis /wheel arch corroded
f/n/s h/lamp wiper not working
f/o/s underbonnet forward chassis section corroded
front backplates corroded
headlamp wipers split
o/s sill corroded
r/o/s rebound block missing
rear underwing areas corroded
steering rack slight play
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
f/n/s h/lamp wiper not working
f/o/s underbonnet forward chassis section corroded
front backplates corroded
headlamp wipers split
o/s sill corroded
r/o/s rebound block missing
rear underwing areas corroded
steering rack slight play
Offside Obligatory mirror seriously deteriorated, affecting the rear view (8.1.2a)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
slight play in nearside front track rod arm
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Centre Stop lamp not working (1.2.1b)
Offside Outer Rear Suspension component mounting prescribed area is fractured (2.4.A.3)
How Reliable is the Volvo 240?
Based on 134,955 MOT tests across 18,976 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E635 JTP is a 1987 Volvo 240 in Silver with a 2,316cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 1987 Volvo 240 models, the average MOT pass rate is 66.0% with a typical mileage of 135,068 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Volvo 240 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,198 recorded failures. If you're considering buying E635 JTP, it's worth having these areas checked by a mechanic before committing.
The Volvo 240 typically stays on UK roads for around 47 years. At 39 years old, this Volvo 240 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E635 JTP?
You can check the full history of E635 JTP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E635 JTP registered?
E635 JTP is a 1987 Volvo 240, first registered on 15 October 1987.
Is E635 JTP safe to buy?
The MOT history for E635 JTP shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E635 JTP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E635 JTP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.