MOT Status
ExpiredMileage
79,376 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))
Front Brakes imbalanced across an axle 90% (1.2.1 (b) (i))
Nearside Front Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))
Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Brake cable damaged (1.1.15 (a))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Rear fog lamp does not emit a steady red light Wrong colour (4.5.4 (a))
Front Exhaust system has a slight blow
Lower Body has heavy corrosion
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Steering rack gaiter missing or no longer prevents the ingress of dirt Both (2.1.3 (g) (ii))
Offside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Heel board (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch towards rear of wheel (5.3.6 (a) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill under drivers door (6.1.1 (c) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Upper Driver's door hinge insecure (6.2.3 (c) (ii))
both front subframe rubber mounts slight play
both front tyres slightly perished
both front brake discs surface corrosion
Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
both front brake discs surface corrosion
o/s/f brake slight bind
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
bonnet second catch missing
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
bonnet second catch missing
Nearside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
o/s/front & rear floor pan very corroded
rear subframe very corroded
underside very rusty
Centre Rear Registration plate lamp not working (1.1.C.1d)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Horn not working (1.6.2a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Front position lamp(s) not working (1.1.A.3b)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear rear brake binding (3.7.B.1)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
o/s/front & rear floor pan very corroded
rear subframe very corroded
underside very rusty
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front wheel bearing has slight play (2.5.A.3c)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Horn not working (1.6.2a)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Side repeater not working (1.4.A.2c)
Offside Steering rack gaiter split (2.2.D.2d)
Rear registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Some movment in the n/s top ball joint.
the other sill is weak
Exhaust has a major leak of exhaust gases (7.1.2)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
the other sill is weak
the radiator is leaking
Offside rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
How Reliable is the Austin Mini Jet Black?
Based on 2,772 MOT tests across 316 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
E645 MDD is a 1988 Austin Mini Jet Black in Black with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 1988 Austin Mini Jet Black models, the average MOT pass rate is 63.6% with a typical mileage of 63,040 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini Jet Black fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 317 recorded failures. If you're considering buying E645 MDD, it's worth having these areas checked by a mechanic before committing.
The Austin Mini Jet Black typically stays on UK roads for around 38 years. At 38 years old, this Austin Mini Jet Black is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of E645 MDD?
You can check the full history of E645 MDD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was E645 MDD registered?
E645 MDD is a 1988 Austin Mini Jet Black, first registered on 9 April 1988.
Is E645 MDD safe to buy?
The MOT history for E645 MDD shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does E645 MDD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on E645 MDD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.