1988 Mercedes-benz 307 D

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam kingpin (5.1.2 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Offside Front Stub axle has slight vertical movement between stub axle and axle beam kingpin (5.1.2 (c) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam kingpin (5.1.2 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Offside Front Stub axle has slight vertical movement between stub axle and axle beam kingpin (5.1.2 (c) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt steering arm (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leaf spring mounting (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Rear rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Parking brake lever has little reserve travel (3.1.6b)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

both front inner wheel arches corroded just outside prescribed areas

both rear inner sills corroded just outside prescibed area

offside front step corroded just outside prescribed area

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Emissions not tested (7.0)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

rear brake application uneven (3.7.B.2)

both rear inner sills corroded outside prescribed area

offside front inner step corroded outside prescribed area

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Hazard warning switch faulty (1.4.B.1d)

Nearside Outer Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside rear outer chassis corroded not within prescribed area