2020 Mercedes-benz C

Anti-roll bar linkage ball joint dust cover severely deteriorated front ns and os (5.3.4 (b) (i))

Central Exhaust mounting defective clamp (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

under trays fitted

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Brake pipe excessively corroded front to rear x 2 (1.1.11 (c))

Anti-roll bar linkage ball joint dust cover severely deteriorated front ns and os (5.3.4 (b) (i))

Central Exhaust mounting defective clamp (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

under trays fitted

Central exhaust clamp corroded

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Road wheel badly distorted (5.2.2 (c) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Tyre pressure monitoring system malfunctioning or obviously inoperative (5.2.3 (h))

Nearside Front Road wheel fractured (5.2.2 (a)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

centre exhaust clamp corroded/ deteriorated

Exhaust mounting defective centre clamp broken but exhaust still secure and exhaust flexi joint worn but not blowing (6.1.2 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

front shocks casings rusty

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Lower Suspension arm ball joint excessively worn front arm (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

front shocks casings rusty

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint excessively worn Rearward (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake pipe corroded, covered in grease or other material offside and nearside rear unable to have a view due to covers fitted and road dirt / rain water (1.1.11 (c))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

nearside & offside front tyre wall damaged and scrubed off

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

nearside & offside front tyre wall damaged and scrubed off

Engine cover and under tray fitted

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front registration plate font not substantially similar to the prescribed font (6.3.4d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate font not substantially similar to the prescribed font (6.3.4d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)