1987 Austin Mini Mayfair

Corrosion in nearside front inner wing

Corrosion starting outer sills

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Corrosion in nearside front inner wing

Corrosion starting outer sills

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Corrosion starting in outer sills

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Exhaust emissions carbon monoxide content excessive 4.31- limit 3.5 (8.2.1.2 (b))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear subframe corroded (5.3.6 (a) (i))

both outer sills starting to corrode

Both front suspension arms boots deteriorated

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Nail in tyre X2 ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Both front suspension arms boots deteriorated

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Nail in tyre X2 ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Nail in tyre X2 ()

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Slight play in offside rear radius arm bush

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim too far to the right (4.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Nail in tyre X2 ()

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Slight play in offside rear radius arm bush

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Inner Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Exhaust has a major leak of exhaust gases pipe to manifold (7.1.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp not working (1.3.2b)

Nearside Front Inner Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Body has slight corrosion (6.1.B.2)

Front Torque/reaction arm has a slightly deteriorated rubber bush both sides (2.4.G.2)

Front Tyre worn close to the legal limit N/S & O/S on 2mm (4.1.E.1)

Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt upper & lower both sides (2.4.G.2)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Shock absorber has a slightly worn bush both sides (2.7.4)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

Brake fluid warning lamp inoperative (3.6.G.2)

Front Exhaust has a major leak of exhaust gases Manifold/downpipe (7.1.2)

Front position lamp(s) adversely affected by the operation of another lamp both sides (1.1.A.3f)

Front position lamp(s) not working both sides (1.1.A.3b)

Horn not working (1.6.2a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Body has slight corrosion (6.1.B.2)

Front Torque/reaction arm has a slightly deteriorated rubber bush both sides (2.4.G.2)

Front Tyre worn close to the legal limit N/S & O/S on 2mm (4.1.E.1)

Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt upper & lower both sides (2.4.G.2)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Shock absorber has a slightly worn bush both sides (2.7.4)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Sub-frame cracked (2.4.G.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake lever insecure (3.1.3b)

Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Steering rack gaiter split (2.2.D.2d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Rear fog lamp not working (1.3.2b)

Front wheel bearing has slight play (2.5.A.3c)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Side repeater slightly discoloured (1.4.A.2f)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Vehicle structure has slight corrosion (6.1.A.1)

front brake juddering slightly (3.7.A.2b)

Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Vehicle structure has slight corrosion (6.1.A.1)

front brake juddering slightly (3.7.A.2b)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

bumpers not fitted

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Front registration plate missing (6.3.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp aim too low (1.8)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Rear Exhaust system not adequately supported (7.1.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

bumpers not fitted