1988 BMW 316

Integral body structure is corroded but structural rigidity is not significantly reduced gearbox mount (6.1.1 (c) (i))

all metal brake pipes painted

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Other passenger door likely to open inadvertently or not remain closed (6.2.3 (b) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Play in steering rack inner joint(s)

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis infront of spring (2.4.A.3)

Brake pipe excessively corroded front to rear (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Battery lose

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Battery lose

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

all rear brake pipes rusty

Battery insecure (1.9.1)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Direction indicator not working (1.4.A.2c)

all rear brake pipes rusty

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)