1990 Toyota MR2

Suspension component mounting repair covered in underseal both sills inner and outer (5.3.6 (a) (i))

undersealed throughout

Brake pipe corroded, covered in grease or other material all brake pipes covered in underseal (1.1.11 (c))

Chassis covered in underseal from front to rear

Oil leak, but not excessive (8.4.1 (a) (i))

Manufactures engine and body covers fitted restricting inspection of components

underseal restricting inspection of component's

Rear Coil spring corroded n/s + o/s (5.3.1 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Rear Service brake excessively binding n/s + o/s (1.2.1 (f))

Front Coil spring corroded n/s + o/s (5.3.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to legal limit/worn on edge n/s + o/s (5.2.3 (e))

Front Tyre worn close to legal limit/worn on edge both front tyres are close to the limit (5.2.3 (e))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Front position lamp(s) not working dipped beam (1.1.A.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Direction indicator not working (1.4.A.2c)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake pad(s) has restricted free movement (3.5.1k)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust noisey

n/s/f brake sticky

rear brake disc rusty

sills rusty

Brakes imbalanced across an axle (3.7.B.5b)

Direction indicators not working (1.4.A.2c)

Front registration plate character(s) laid out in an incorrect format (6.3.4f)

Front registration plate character(s) likely to be misread (6.3.4b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside front brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate character(s) laid out in an incorrect format (6.3.4f)

Rear registration plate character(s) likely to be misread (6.3.4b)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front coil spring corroded (2.4.C.1b)

Rear coil spring corroded (2.4.C.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Bonnet retaining device ineffective (8.4.2)

Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Horn not working (1.6.2a)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front brake disc has restricted free movement (3.5.1j)

Nearside Side repeater missing (1.4.A.2b)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake: efficiency below requirements (3.7.D.4)

registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater missing (1.4.A.2b)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Rear Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Front registration plate character(s) likely to be misread (6.3.4b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear registration plate character(s) likely to be misread (6.3.4b)