1988 Mercedes-benz Sl

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Fuel Pipe/s corroded nearside rear ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive boot floor near rear coil spring (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting prescribed area damaged but not considered excessive around d bush mounting with 30cm of front lower arm mounting (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Fuel Pipe/s corroded ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive on anti roll bar D bush mounting (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Fuel Pipe/s corroded ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive on anti roll bar D bush mounting (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body near spring hanger (5.3.6 (a) (i))

Oil leak, but not excessive from engine (8.4.1 (a) (i))

Rear Fuel Pipe/s corroded ()

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Rear Fuel Pipe/s corroded ()

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Windscreen washer not working (3.5 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Position lamp not working (4.2.1 (a))

fuel pipe at rear of vehicle slightly corroded

n/s washers not working but sufficient fluid provided to the drivers view

Coolant leak ()

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Brake pipe excessively corroded flexi feed (3.6.B.2c)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake pipe excessively corroded flexi feed (3.6.B.2c)

Nearside Rear water leek from engine

Nearside Front Tyre worn close to the legal limit (4.1.E.1)