1998 Yamaha FZR400

Front Brake excessively binding (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim not tested Power failure during test (4.1.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake grabbing severely Sudden rise in brake effort during application (1.2.1 (c))

Suspension arm pin or bush excessively worn Lower link bearing (5.3.4 (a) (i))

Wheel alignment incorrect which adversely affects the steering To RHS (2.4 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering headbearing has excessive free play (2.2.2)

Exhaust noisy (7.1.2)

Front Floor brake test indicates a sticking brake (3.3.C2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high and too far to the right. (1.6)

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering headbearing has excessive free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Nearside foot rest bent

Rear shock absorber has a light misting (2.4.A.1c)

Tape fitted to headlight to correct beam pattern

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Tape fitted to headlight to correct beam pattern

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Floor brake test indicates a slightly juddering brake (3.3C2d.)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Steering headbearing has excessive free play (2.2.2)

Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.3)

Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)