MOT Status
ExpiredMileage
63,783 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed. (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed. (6.1.1 (c) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed. (6.1.1 (c) (i))
Offside Rear All direction indicators incorrect colour (4.4.3 (a))
Offside Rear lamp damage.
Sump corroded.
Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
oil leak.
underbody and chassis legs corroded.
exhaust has a slight leak.. underbody band brake pipes corroded,
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Position lamp not working (4.2.1 (a) (ii))
exhaust has a slight leak.. underbody band brake pipes corroded,
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Anti-roll bar linkage ball joint excessively worn x2 (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
brake pipes corroded slight play in steering
Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front coil spring broken (2.4.C.1a)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
rear tyre worn
Anti-roll bar linkage has excessive play in a ball joint both front (2.4.G.2)
Brake load sensing valve seized (3.6.E.3)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
rear tyre worn
o/s/f tyre worn out on inside
Offside Front coil spring fractured (2.4.C.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Stop lamp not working (1.2.1b)
o/s/f tyre worn out on inside
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe seriously damaged (found during steering lock to lock check) (2.2.D.2b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear Registration plate lamp not working (1.1.C.1d)
engine management light illuminated indicating a vault.
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EA03 OZG is a 2003 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying EA03 OZG, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EA03 OZG?
You can check the full history of EA03 OZG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EA03 OZG registered?
EA03 OZG is a 2003 Peugeot 206, first registered on 31 March 2003.
Is EA03 OZG safe to buy?
The MOT history for EA03 OZG shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EA03 OZG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EA03 OZG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.