2003 Suzuki Ignis

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material valve to join (1.1.11 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material valve to join (1.1.11 (c))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pad(s) wearing thin inner low on limit (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

bonnet latch spring poor condition

exhaust bracket broken front

heavy corrosion to suspension components

both front wipers splitting at ends

front exhaust bracket broken but exhaust still supported

offside front brake pipe at brake hose rusty

offside rear inner sill rusty

rear brake pipe at union lower pipe rusty

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

both front wipers splitting at ends

front exhaust bracket broken but exhaust still supported

offside front brake pipe at brake hose rusty

offside rear inner sill rusty

rear brake pipe at union lower pipe rusty

Brake pipe corroded, covered in grease or other material by load valve close to limit (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge both wearing on edges (5.2.3 (e))

Rear Coil spring corroded both (5.3.1 (b) (i))

Shock absorbers has a reduced damping effect (5.3.2 (d))

both headlight lens poor condition

both rear arms corroded

front exhaust bracket broken

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Brake pipe corroded, covered in grease or other material by load valve close to limit (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge both wearing on edges (5.2.3 (e))

Rear Coil spring corroded both (5.3.1 (b) (i))

Shock absorbers has a reduced damping effect (5.3.2 (d))

both headlight lens poor condition

both rear arms corroded

front exhaust bracket broken

corrosion to inner sills

corrosion to rear lower arms on limit

dampness to load valve no leak at time of test

exhaust bracket broken

oil leak

Suspension component mounting prescribed area is corroded but not considered excessive bot rear lower arm bushes (5.3.6 (a) (i))

corrosion to brake pipe by brake load valve

dampness to front radiator lower panel

horn noise poor

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive bot rear lower arm bushes (5.3.6 (a) (i))

corrosion to brake pipe by brake load valve

dampness to front radiator lower panel

horn noise poor

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin on limit (1.1.13 (a) (ii))

corrosion to brakes pipes on limit

corrosion to coil springs

front exhaust bracket corroded

oil leak

front exhaust mounting broken but system still supported

Nearside Rear Stop lamp not working (1.2.1b)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

rear brake imbalance at 39%, system requires attention