2004 Mazda MX-5

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Front Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear brake dust guard deteriated slightly

slight under body corrosion present in areas under car

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

front and rear suspension arms corroded

Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

front and rear suspension arms corroded

front and rear suspension arms slightly corroded

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

front and rear suspension arms slightly corroded

Front under gaurd insecure

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake disc corroded.

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front bumper insecure

Rear Brake disc corroded.

Rear Brake pad(s) wearing thin (3.5.1g)

nearside front headlamp glass misting over beam pattern just ok.

brake disc slightly pitted (3.5.1h)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear rear brake grabbing slightly (3.7.A.5b)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear rear brake grabbing slightly (3.7.A.5b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear rear brake grabbing slightly (3.7.A.5b)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear rear brake grabbing slightly (3.7.A.5b)