MOT Status
ValidMileage
77,234 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))
Under-trays fitted obscuring some underside components
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))
Under-trays fitted obscuring some underside components
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Under-trays fitted obscuring some underside components
BOTTOM ENGINE COVER FITTED OBSCURING SOME UNDERSIDE COMPONENTS
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
BOTTOM ENGINE COVER FITTED OBSCURING SOME UNDERSIDE COMPONENTS
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Headlamp has a product on the lens so that the light output is severely reduced Both sides (4.1.4 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
O/S/F tyre has cuts
Offside Rear Nail in tyre
Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Nearside Rear Nail in tyre cuts in tread not deep enough too reach ply or cords
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
front pads getting low
near side rear tyre cracking on the side walls
off side and near side front lower suspension arm back bushes slight play
front brake pads are low
nearside and offside front lower arms rear bushes have sight play
nearside and offside rear tyres are perishing sightly
rear brake pads are getting low
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EA06 UCY is a 2006 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 73.1%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying EA06 UCY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EA06 UCY?
You can check the full history of EA06 UCY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EA06 UCY registered?
EA06 UCY is a 2006 Mazda 3, first registered on 31 July 2006.
Is EA06 UCY safe to buy?
The MOT history for EA06 UCY shows 26 tests with a 73.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EA06 UCY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EA06 UCY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.