MOT Status
ValidMileage
177,536 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Front Inner Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))
Front Suspension component corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
UNDERBODY SILLS CORRODED BOTH SIDES
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Front Inner Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))
Front Suspension component corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
UNDERBODY SILLS CORRODED BOTH SIDES
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin Both (1.1.13 (a) (ii))
Under Body Corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Tyre worn close to legal limit/worn on edge both rear (5.2.3 (e))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (within 30cm of trailing arm mounting) (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Tyre worn close to legal limit/worn on edge both rear (5.2.3 (e))
Nearside Front Upper Suspension arm ball joint excessively worn wishbone ball joint (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
head lamps faded
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
nearside and offside rear exhaust joints are rusty
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Lower Suspension arm pin or bush excessively worn inner (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
nearside and offside rear exhaust joints are rusty
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Headlamp aim too high and too far to the right. (4.1.2 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Tyre pressure monitoring system light illuminated.
Under body shields fitted
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Nearside Front position lamp(s) not working (1.1.A.3b)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EA08 AWO is a 2008 Mazda 6 in Blue with a 2,488cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2008 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 87,272 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying EA08 AWO, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 18 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EA08 AWO?
You can check the full history of EA08 AWO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EA08 AWO registered?
EA08 AWO is a 2008 Mazda 6, first registered on 31 March 2008.
Is EA08 AWO safe to buy?
The MOT history for EA08 AWO shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EA08 AWO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EA08 AWO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.