2009 Hyundai I10

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive including springs and shocks (5.3.6 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive including springs and shocks (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive including shock absorbers and springs (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive including shock absorbers and springs (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive including shock absorbers and springs (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive including shock absorbers and springs (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Front Outer Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension components and rear box sections have surface rust

Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Front Outer Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension components and rear box sections have surface rust

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

both front lower ball joint boots perished

suspension components and rear box sections have surface rust

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Lower Both ball joint covers starting to perish

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Suspension components and rear box sections have surface rust

both front tyres wearing badly on inner edges