MOT Status
ValidMileage
67,701 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Coil spring corroded both (5.3.1 (b) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides perished (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material main (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material main (1.1.11 (c))
Brake pipe corroded, covered in grease or other material front to rear brake pipe at offside rear flexible brake hose (1.1.11 (c))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
abs operating at slow speeds
rear shock absorber casings corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim unable to be tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure inner side wall (5.2.3 (d) (ii)) DANGEROUS
rear shock absorber casings corroded
Brake pipe corroded, covered in grease or other material front to rear brake pipe at offside rear flexible brake hose (1.1.11 (c))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
abs operating at slow speeds
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Windscreen damaged but not adversely affecting driver's view at bottom (3.2 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))
Oil leaking excessively from engine oil filter (8.4.1 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Windscreen damaged but not adversely affecting driver's view at bottom (3.2 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake slack adjuster advise adjustment (1.1.18 (a))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Brake slack adjuster advise adjustment (1.1.18 (a))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
offside front tyre showing wear on edges
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
offside front tyre showing wear on edges
How Reliable is the Hyundai I20?
Based on 1,488,641 MOT tests across 136,037 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EA63 FCL is a 2013 Hyundai I20 in Black with a 1,248cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 61.5%.
Across all 2013 Hyundai I20 models, the average MOT pass rate is 77.3% with a typical mileage of 46,025 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I20 fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 6,256 recorded failures. If you're considering buying EA63 FCL, it's worth having these areas checked by a mechanic before committing.
The Hyundai I20 typically stays on UK roads for around 17 years. At 13 years old, this Hyundai I20 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EA63 FCL?
You can check the full history of EA63 FCL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EA63 FCL registered?
EA63 FCL is a 2013 Hyundai I20, first registered on 23 October 2013.
Is EA63 FCL safe to buy?
The MOT history for EA63 FCL shows 13 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EA63 FCL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EA63 FCL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.