1972 Morris Mini

Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Drive shaft joint excessively worn (6.1.7 (c) (i))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Drive shaft joint excessively worn (6.1.7 (c) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Brake cable has restricted free movement (1.1.15 (e))

Offside Rear Brake pivot has restricted free movement (1.1.15 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Brake performance not tested (1.2.1 (g))

Emissions not tested (8.2.1.2 (d))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases centre (6.1.2 (a))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip missing (6.1.7 (g) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Body has slight corrosion boot floor pan (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Body has slight corrosion boot floor pan (6.1.B.2)

Exhaust has a minor leak of exhaust gases FLANGE JOINT (7.1.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

both sides front floors/inner wheel arches

front of both sides inner sills/floors corroded

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Steering rack gaiter split (2.2.D.2d)

Parking brake: efficiency below requirements (3.7.B.7)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Horn not working (1.6.2a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)