2004 MG Tf

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength X2 HOLES (5.3.6 (a) (i))

Offside Rear Floor excessively deteriorated (6.2.4 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength X2 HOLES (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Horn not working (7.7 (a) (ii))

Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear outer sill corroded and holed (6.1.1 (c) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim too high and too far to the left. (4.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Nearside Rear Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Offside Front Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Offside Rear Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Tyre slightly damaged/cracking or perishing Both. (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases Joint. (6.1.2 (a))

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Stop lamp not working (1.2.1b)

Offside Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Ball joint has excessive play (2.2.B.1f)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)