2003 Ford Transit

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Outer Exhaust has a minor leak of exhaust gases (7.1.2)

all 4 wheal rches corroded

all remaining brake pipes slightly corroded

Brake pedal anti-slip provision missing (3.3.A.1b)

Brake performance not tested (3.7.A.1)

Emissions not tested (7.0)

Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

all four wheel arches are corroded

middle exhaust rubber split

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tie bar/rod synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front outer sil damaged

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

front brake application uneven (3.7.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front outer sil damaged

Body has slight corrosion (6.1.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear wheel bearing has slight play (2.6.2)

front brake discs scored

o/s/f sill has light damage

Brake load sensing valve linkage seized (3.6.E.3)

Brake pedal anti-slip provision worn smooth (3.3.A.1b)

Horn not working (1.6.2a)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front coil spring fractured (2.4.C.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp aim too high (1.8)

Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Nearside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Body has slight corrosion (6.1.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear wheel bearing has slight play (2.6.2)

front brake discs scored

o/s/f bottom ball joint boot split

o/s/f sill has light damage

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

offside front brake disc inner vent pitted

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Registration plate lamp not working (1.1.C.1d)

offside front brake disc inner vent pitted

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Registration plate lamp not working (1.1.5c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)