2003 Fiat Doblo

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

SLIGHT LEAK ON POWER STEERING

Engine mounting damaged or deteriorated resulting in excessive movement BOTTOM MOUNT (6.1.8 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced NO BEAM IMAGE (4.1.4 (b))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL TO INNER WHEEL ARCH (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced NO BEAM IMAGE (4.1.4 (b))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL TO INNER WHEEL ARCH (5.3.6 (a) (i))

Offside Windscreen wiper not working (3.4 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

SLIGHT LEAK ON POWER STEERING

engine stabiliser mount worn

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Offside Front Direction indicators slightly discoloured (1.4.A.2f)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Offside Front All position lamps have less than 50% of the light sources illuminating (1.1.A.3b)

Offside Front Direction indicators slightly discoloured (1.4.A.2f)

Nail in nearside rear tyre

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

offside rear wheel arch slightly corrided.

Fuel hose leaking (7.2.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Direction indicators slightly discoloured (1.4.A.2f)

Steering system excessively rough (2.2.D.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)