2003 Subaru Forester

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded joint to flexi (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe excessively corroded joint to flexi (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both near connecting block (1.1.11 (c))

park brake has long travel

power steering belt damaged and not running on crank pulley properly

Front Exhaust has a major leak of exhaust gases joint bolt loose (6.1.2 (a))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both near connecting block (1.1.11 (c))

park brake has long travel

power steering belt damaged and not running on crank pulley properly

Brake pipe slightly corroded all (3.6.B.2c)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Offside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Brake pipe slightly corroded all (3.6.B.2c)

Exhaust has a major leak of exhaust gases middle pipe, by rubber mount bracket (7.1.2)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Offside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Exhaust has a minor leak of exhaust gases front pipe joint (7.1.2)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Rear Brake pipe slightly corroded all rear (3.6.B.2c)

Rear all rear

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Rear Brake pipe slightly corroded all rear (3.6.B.2c)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement all rear (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Under-trays fitted obscuring some underside components

all four tyres wearing on edges

middle section of exhaust has slight blow

Brake hose slightly deteriorated (3.6.B.4d)

Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

all brake discs have corrosion.

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front & rear number plates slightly stained