2006 Toyota Aygo

Nearside Front Anti-lock braking system wiring damaged but not excessively (1.6 (d))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-lock braking system wiring damaged but not excessively (1.6 (d))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear axle corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension locking device missing ball joint locking device (5.3.6 (b))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension locking device missing ball joint locking device (5.3.6 (b))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases by the hanger bracket (6.1.2 (a))

Nearside Front Road wheel more than one fixing loose (5.2.1 (a) (ii)) DANGEROUS

Offside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) DANGEROUS

Central Rear Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Anti-lock braking system wiring damaged but not excessively (1.6 (d))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-lock braking system wiring damaged but not excessively (1.6 (d))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear axle corroded

Hazard warning switch inoperative (4.4.2 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output Nearside and offside (4.1.4 (b))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

handbrake efficiency only just met requirements

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front anti roll bar link bushes (5.3.4 (a) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect bulb? (4.1.2 (c))

Nearside Rear Seat belt not functioning as intended (7.1.2 (c))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Seat belt not functioning as intended (7.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Brake pipe excessively corroded and union from flexy (1.1.11 (c))

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Rear Body has a projection caused by damage bumper (6.1.C.1)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Horn not working (1.6.2a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)