2009 Mercedes-benz Sprinter

Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

zero emissions

Brake disc worn, but not excessively front and rear (1.1.14 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

zero emissions detected

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

zero emissions detected

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))

Nearside Front Tyre has had the tread recut (5.2.3 (g))

Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Outline marker lamp showing white light to the rear (4.2.3 (a) (ii))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Outline marker lamp missing (4.2.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Play in steering rack inner joint(s) ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Exhaust has a major leak of exhaust gases Front flexi (7.1.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Shock absorber insecure (2.7.2b)

Offside Rear position lamp(s) not working Centre side marker (1.1.A.3b)

Rear position lamp(s) incorrect colour Lens broken (1.1.A.3e)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Play in steering rack inner joint(s) ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Lower Suspension arm has slight play in a ball joint Both (2.4.G.2)

Prop center bearing slightly noisy

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Stop lamp not working (1.2.1b)

Under-trays fitted obscuring some underside components

drivers seat damaged and worn

drivers seat damaged and worn

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)