2013 Lexmoto Arizona 125

Rear Wheel alignment slightly misaligned wheel pointing too offside (2.4 (a))

Chain guard insecure (6.1.7 (i))

Handlebar excessively deformed (2.2.1 (c) (i))

Rear Brake component insecure split pin missing brake control arm (1.1.21 (c))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Lower Engine mounting/bracket missing (6.1.8 (a) (ii)) DANGEROUS

Rear Wheel alignment slightly misaligned wheel pointing too offside (2.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front suspension assembly has slight free play between the sliding members (2.3.4)

Nearside bar end missing

Upper Steering headbearing has slight free play (2.2.2)

gear lever/linkage worn/loose

Brake pedal has inadequate reserve travel (3.1.3b)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate deteriorated (6.3.1d)

Stop lamp does not illuminate immediately a brake applies rear brake (1.3.1a)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Nearside bar end missing

Upper Steering headbearing has slight free play (2.2.2)

gear lever/linkage worn/loose

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn rear (6.2.1e)

Drive chain worn but not considered excessive front (6.2.1e)

Brake pedal is positioned so that the brake cannot be readily applied rear (3.1.3c)

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Drive chain excessively loose (6.2.1d)

Front position lamp incorrect colour (1.1.2a)

Stop lamp does not illuminate immediately a brake applies front (1.3.1a)

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn rear (6.2.1e)

Drive chain worn but not considered excessive front (6.2.1e)