2013 Yamaha Yzf

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake disc contaminated (1.1.14 (b))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

battery poor low charge

Exhaust noisy (8.1.1 (a))

Offside Front Footrest slightly loose (6.2.12 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

rubber missing off of rear foot brake

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Drive sprocket carrier bearing worn .

Rear Exhaust noisey .

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly tight (6.2.1d)

Exhaust noisy (7.1.2)

Front and rear tyre pressures were very low.

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front tyre was completely flat

Drive chain excessively loose (6.2.1d)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front tyre was completely flat