2001 Peugeot 206

Brake load sensing valve seized (3.6.E.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Rear Brake pipe inadequately supported to hose (3.6.B.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Steering system excessively tight upper mount bearing (2.2.D.1)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Brake pipe slightly corroded to compensator (two pipes) (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear registration plate deteriorated (6.3.1d)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel low warning lamp illuminated

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

foot brake has travel

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

foot brake has travel

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brake pipe excessively corroded (3.6.B.2c)

Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Stop lamp remains on when the brakes are released (1.2.1e)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Braking system leaking (3.6.A.1)

Offside Rear rear brake application uneven (3.7.B.2)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

CENTER & REAR EXHAUST RUST [NO LEAKS AT PRESENT]

ENGINE OIL LEAKS [ CYL HEAD ? ]

FRONT BRAKE DISCS WORN TO LIMIT

O/S LOWER SUSPENSION BUSH INSERCURE